Sawstop T-Glide Fence Storage System — DIY Blog

I finally purchased a 3D printer. I’ve been wanting one forever and after researching and figuring out my price point and the right model, I purchased the FlashForge Adventure 3.

After learning the basics of Blender (modelling) and Flashprint (the Flashforge printing/splicing software), I designed a piece that slides over my table saw fence to serve as a spacer block for cutting safe miters on the table saw. It’s clean, sleek, and is a really fun execution of an idea I came up with entirely on my own.

Make sure you check out the video to follow along with the design and build!

🗜 TOOLS

SAWSTOP 3HP PCS: https://amzn.to/3cr1dJO
FlashForge Adventure 3 (Lite Version) https://amzn.to/3a4H4vp
PLA Filament https://amzn.to/39ZNrQs

Above is an STL file for download incase you’re interested.

If you have any questions or find any issues with the article, feel free to get in touch.
Zach

I was so sick of not being able to find all the essential tools I am constantly using when at the table saw. So, I decided to spend a day designing and building a simple solution that moves with the SawStop T-Glide fence. Having had this now in the shop for the last 5 weeks, I can hands down say this is an absolute must have in your shop.

I can now officially find my tape measure!

Make sure you check out the video to follow along with the design and build!

🌳 MATERIALS

2' x 4' x 1/2" Maple Plywood
TiteBond II Wood Glue: http://amzn.to/2peRFus
Wood Screws and Brad Nails

🗜 TOOLS

SAWSTOP 36” 3HP PCS: https://amzn.to/3cr1dJO
Brad Nailer: https://amzn.to/2Uz6tCI
Pin Nailer: https://amzn.to/2D6EaVf
MagSwitch Vertical Featherboard: https://amzn.to/37IdBpS
Power Drill: http://amzn.to/2q1l5wn
Impact Driver: http://amzn.to/2q1l5wn
Router Bit Storage Inserts - Rockler

Above is a Sketchup 3D file for purchase (only $2) .

If you have any questions or find any issues with the article, feel free to get in touch.
Zach